LK-G32 Broad spectrum Led Light Dental Light Cure Unit with Long
Battery Life
1 Modes setting: Lightly press the mode key to change the running
modes. The Curing Light will shine the
diffrent lluminated blue light.The available modes see the
Technical Parameters table.
2 Time setting: Lightly press the time button to choose the
solidification time. The available time setting
see the Technical Parameters table.
3 During the operation, aim blue light at the position needing
solidification. Press the power button "ON/
OFF" switch, a "beep" sound will appear, the Curing Light starts to
work under the selected mode. Then it
counts down to "O" second to end the solidification.
4 During operation, the blue light can be stopped by press the
power button "ON/OFF" at any time.4.5 Low power detect
circuit is fixed inside of the main unit, when low power is
detected, the indicator of the main unit will wink, please charge
in time.
6 After the operation, please clean the fiber with calico in order
not to affect the light intensity.
7 This equipment will tum off automatically if no any action within
2 minutes, tum it on by press "ONOFF" button.
8 The depth of solidification of composite is no less than 4mm per
10 seconds.
9 The Curing Light is equipped with over-heat protection system. It
can continuously work 200s, For
example, continuously operate the curing light for 10 times under
20s working mode, then it will come into
over-heat protection status. And only after 2 minutes sleep, it can
restart working 200s continuously.
| Power Input | 100V-240VAC 50Hz/60Hz |
| Power Output | DC 5V/1A |
| Wave length | 420nm-480nm |
| Light intensity | 1000m/cm2 _ 2500mW/cm2 |
| Battery | 2500mA |
1. How can I place an order?
You can contact any of our sales person for an order. Please
provide the details of
your requirements as clear as possible. So we can send you the
offer at the first time.
For designing or further discussion, it is better to contact us
with Skype, TradeManger or QQ or WhatsApp or other instant ways, in
case of any delays.
2. When can I get the price?
Usually we quote within 24 hours after we get your inquiry.
3. Can you do the design for us?
Yes. We have a professional team having rich experience in gift box
design and manufacturing.
Just tell us your ideas and we will help to carry out your ideas
into perfect boxes.
4. How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the
samples will be ready
for delivery in 1-3 days. The samples will be sent to you via
express and arrive in 3-5 days.
5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place
the order.
Always 25-28days based on general order .
6. What is your terms of delivery?
We accept EXW, FOB, CFR, CIF, etc. You can choose the one which is
the most convenient
or cost effective for you.
7. What is the payment way?
1)TT or Wester Union for the trial order
2) ODM, OEM order, 30% for deposit,70% against the copy B/L.
Zhengzhou Linker Medical Equipment Co., Ltd. is located in
Zhengzhou, central area of China, a traditional commerce city with
rich history
and culture. Since 2007, our company has been focusing on dental
products export, including dental equipments and materials, dental
cultural products and electrical products and so on.
About Us:
Web: www.zzlinker.com
Email: jen@zzlinker.com
Mobile/WhatsApp/Wechat: +8618638579755
