USA Apixia Dental X Ray Machine PSP 3D Scanner

Specification:

How to Takeing An X ray Image

1. Placed the sealed plate envelope with erased plate inside and

3. Take the exposed plate out of plate box and drop the plate into

position in patients' mouth as you would regular x-ray film.

the correct sized plate guidance slot (Figure 10).

(Black side of barrier envelope should face the X -ray Tube.)

4. The machine will automatically scan the image when plate is

2. Take an x-ray exposure then remove the plate from mouth.

inserted. (Be sure to handle plates along with edge with thumb

and forefinger to avoid scratches to the plate surface)

(The x-ray dose will be similar to a generic D speed intraoral

5. Wait until the PSP scanner LED ready light turns green to

flm depending on type of x ray system used; actual dosc may

insert another plate. Press the plate down into the machine at

vary)

3. Repeat steps 1 and 2 until all x-rays that are required have

anytime if necessary.)

been taken.

6. Verify plate has been accepted by observing the plate being fed

4. Disinfect hygenic plate envelopes with disinfectant soap and

into the scanning device. An audible click can be heard once

plate scanning has initiated.

water.

7. Repeat steps 1-5 until all exposed plates have been scanned

SCANNING THE EXPOSED PLATES

into the PSP scaner.

How to Installing The scanner:

1. Conect the suppied USB hub to the USB port of the computer.

2. Connect the supplied USB 2.0 wire to the rear of the PSP scanner

and then to the USB hub connected to the computer.

3. Connect the power supply adapter to the PSP machine electrical

input on the rear of the unit.

4. Connect the line cord between the main outlet and the power

supply. The scanner is now ready to be turned on.

5. Press the power button to turn on the PSP scanner. The power

button will iluminate blue to indicate the machine is on.

6. If the drivers have been installed correctly, Windows will detect the

PSP scanner as a new USB Device and the Found New Hardware

Wizard will appear.

Note: The Found New Hardware Wizard may appear each time you

plug the unit into a diffcrent USB port on the computer.

7. Choose from sizes 0, 1, 2 or 3 plate guide slot to attach to the top of the

machine (Figure 1).

8. Pull the receptor tray out (Figure 2) and turn on the PSP scanner.

Contact Us:

DepartmentDaisy Dai(Ms)/Export

Linker Dental Group Limited
Web: www.zzlinker.com
Skype: zzlinker3

Email: daisy@zzlinker.com
Mobile/whatsapp/wechat:0086 13849058625

Zhengzhou Linker Medical Equipment Co., Ltd. is located in Zhengzhou, central area of China, a traditional commerce city with rich history and culture.

Since 2007, our company has been focusing on dental products export, including dental equipments and materials, dental cultural products and electrical products and so on. We believe that quality of products and service are the lifeline of enterprise. Our company has strict control on products quality, partners’ selection. All of our products are popular in Europe, America, Middle East, Asia Area more than 50 different countries and areas. While developing long and lasting cooperation with many big companies in these areas, we are seeking for more new partners from all over the world. If you need any dental products, don’t forget to give us enquiry, we will discuss further on our mutual beneficial cooperation.

Our main products are dental unit, air compressor, autoclave, X ray unit, ultrasonic scaler, light cure, air turbine handpiece, intra-oral camera and apex locator. Meanwhile we can supply branded products from Dentsply, Mani, Saeshin, Saeyang, NSK, Woodpecker, Vita, Meta, Coxo, Greatstar, BEING, SINOL, RUNYES, GAPADENT, SUPLINE, SMIC and so on.

“For your better clinic, for all better teeth, for most beautiful smile” is our goal of developing. Welcome to visit website or company to know more. Thanks very much.